This Article Will Sump Pump You Up

Sump Pumps in Naperville, IL
Sump Pumps in Naperville, IL

Sump pumps in Naperville, IL are your first line of defense to keep water out of your basement. They also protect your foundations and the structural integrity of your house.

Sump pumps come in various shapes and sizes so while one appliance might be the right solution for one property it may be completely inappropriate for the requirements of another building.

Sump pumps are easy to install and any do-it-yourselfer with a little motivation can install a sump pump on their own.

Sump pumps are designed to pump extra water out of your basement. That water can come in if the basement is below the water table line in your area, if it floods, or if you simply get too much rain sometimes. Regardless of why they’re needed, sump pumps can save thousands of dollars in damage caused by basement flooding.

Sump pumps can be bought with various horsepower ratings, or based on how many gallons of water they pump in an hour. How large of a sump pump you need doesn’t usually depend on your house size. Instead, size selections are made based on how far under the water table your house is, how much rain and flooding your area gets, and how good your gutter and lawn grading is.

Sump pumps are made so when water reaches a certain level, a lever is tripped which turns the pump on. It takes the water and moves it out of the basement or crawl space via a discharge line. This line goes outside the home and brings the water away from the house.

Sump pumps are needed more in areas which have lots of flooding, or when the house is below the water table line. However they’re useful as a precaution in any house which has a basement, since that basement is always at least partially underground.

Sump pumps are usually wired into a house’s main electrical system, but it’s critical for them to have some kind of power backup as well. Many sump pumps use car style batteries as a power backup, but if you don’t like the idea of having a battery in your basement, you can sometimes get a sump pump that is run off the water pressure in your home.

Sump pumps usually sit in a pit in the lowest corner of your basement, tucked out of the way. When water drains into the pit and reaches a certain level, a switch will activate the pump. The pump will begin to channel the water out of the basement via a pipe to the outside, where it can be deposited far enough from the foundation that it won’t seep back in again. Sump pumps can handle groundwater seepage over time, as well as plumbing and weather-related leaks. Powerful pumps may also be able to remove standing flood waters.

Sump pump maintenance will take no more than around 10 minutes to complete and you will need to check the operation of your sump pump and ensure it is there for you whenever you need it.